CONVEYOR PULLEY
Our drums are produced in the desired diameter and length of the pipe, with or without rubber, with tensioner and drive.
The vulcanized rubber coating is 10-20 mm thick and 65 Shore hard for better adhesion to the tape. It can be done in various ways depending on the needs.
A two-piece cone clamp is used to attach the spindle pulley to the main surface using a flange.
Drive Pulley
In order to increase the friction coefficient between the pulley and the belt on the conveyors, rubber coating is applied.
Usage areas :
• Concrete Batching Plants
• Asphalt Facilities
• Mines
• Crushing and Screening Plants
Return Pulley
Equipped with the features and performance to meet the requirements of the world’s top miners, these conveyor pulleys from ROOLSTAR provide the lowest total cost of ownership compared to others. A "head drum", also known as a "head pulley" or "drive pulley", is driven by mechanical means to provide movement of the conveyor belt.
A tail drum, also known as a tail pulley, is located at the opposite end of the conveyor belt to the head drum. This provides a direction of rotation for the conveyor belt and can also be used as a tension device in some conveyor designs.
Usage areas :
• Concrete Batching Plants
• Asphalt Facilities
• Mines
• Crushing and Screening Plants
